Lifting Columns

REQUEST INFORMATION »

Lifting columns


Lifting columns are the ideal drive elements when a motor setting is required in addition to the stable guidance. The whole technology is integrated and not visible from the outside. These lifting columns do not need any additional coverings. Usually, no special electrical knowledge will be required for the commissioning. Various versions are available as standard for the application in the field of medical technology.

Several lifting columns can be combined and synchronized and offer further impressive application possibilities. The MultiControl units can be linked by a BUS system and enable the synchronization of maximal 32 lifting columns.

Balance the performance and costs of your Linear Actuators. Watch to Learn How »
Multilift lifting columns

Multilift lifting columns

CatalogCAD

Multilift (two-stage lifting columns for up to 500 mm travel)

The Multilift is for continuous height adjustment of tables, equipment, assembly workstations and similar applications. The lifting column can be operated alone or as a pair in parallel. To establish a configuration with absolute synchronous run of several drives (maximal 4), a special drive control is available as synchronous version.    
Max. travel.498 mm          Integrated limit switch
Max. compressive force.3000 NSynchronization via control
Max. tensile force.1000 NOptional manual version
Max. travel speed8 / 16 mm/s
Protection ratingIP 20
RK Slimlift lifting columns

RK Slimlift lifting columns

Catalog

RK Slimlift (two-stage lifting columns for up to 500 mm travel)

The RK Slimlift looks unflashy and but it is highly loadable. The whole drive unit is placed in the column and is not visible from the outside. Fixing slots in the side walls offer the possibility to attach additional components, (e.g. panels, cable channels and braces).  
Max. travel.500 mm          Integrated limit switch
Max. compressive force.4000 NSynchronization via control
Max. tensile force.2000 NOptional manual version
Max. travel speed.8-32 mm/s
Protection ratingIP 30
RK Powerlift lifting columns

RK Powerlift lifting columns

CatalogCAD

RK Powerlift (two-stage lifting columns for up to 500 mm travel/multi-stage lifting columns for over 500 mm travel)

The RK Powerlift has been developed to be used as single column. Its high stability allows amazing side forces at high travel speeds. The RK Powerlift is available as 2-step and 3-step telescope lifting system. The modern and timeless profile design does not need any coverings. 
Max. travel650 mm           Integrated limit switch
Max. compressive force3000 NSynchronization via control
Max. tensile force3000 NIntegrated control
Max. travel speed10-50 mm/sOptional manual version
Protection ratingIP 30
Alpha Colonne lifting columns

Alpha Colonne lifting columns

CatalogCAD

Alpha Colonne (multi-stage lifting columns for over 500 mm travel)

The guide profiles of the Alpha Colonne are square shaped. This makes the side forces identical for all sides. Compared to other systems, it has a third guide step with a large overlapping when it is extended which improves its stability.
Max. travel700 mm          Integrated limit switch
Max. compressive force3000 NSynchronization via control
Max. compressive force3000 NIntegrated control
Max. travel speed8-18 mm/s
Protection ratingIP 30
Lambda Colonne lifting columns

Lambda Colonne lifting columns

CatalogCAD

Lambda Colonne (multi-stage lifting columns for over 500 mm travel)

The lifting column LAMBDA Colonne is a telescopic drive which comes alone or as a pair (Twin) suitable for lifting and lowering in many applications. It can be used for lifting forces up to a max of 4,500 N (single) and 9,000 N(Twin), and a total lifting height of 600 mm.
Max. travel600 mm          Integrated limit switch
Max. compressive force4500 NSynchronization via control
Max. tensile force4500 N
Max. travel speed8-20 mm/s
Protection ratingIP 54 | IP 40
 

Recommended application of the columns

Recommended application of the columns